[RegCNET] Fw: RegCM4 postproc

Fri Nov 5 12:59:49 CET 2010

Dear Isamila,

I am sorry I was forgot to tell you that to change the permission of 'xconv'.
Please do this
  chmod a+x /usr/bin/xconv
But be super user before doing this.
Done!
You are almost there.

--- On Fri, 11/5/10, Ismaila Diallo <ismailadiallo64 at yahoo.fr> wrote:

From: Ismaila Diallo <ismailadiallo64 at yahoo.fr>
Subject: Re: [RegCNET] Fw: RegCM4 postproc
To: "tamirat bekele" <atomictamirat at yahoo.com>
Date: Friday, November 5, 2010, 4:48 AM

Dear Tamirat;
i've followed all the step
first douwload the xconv (64 bits)
i gunzip, after i cp that in xconv (new file)
so i mv xconv /usr/bin

after i open a new terminal
if i do xconv i get this message
bash: /usr/bin/xconv: Permission denied

now i haven't now why i got this error
until now my xconv does't work

Sincerely
Ismaila
From: tamirat bekele <atomictamirat at yahoo.com>
To: Ismaila Diallo <ismailadiallo64 at yahoo.fr>; RegCM
 <RegCNET at lists.ictp.it>
Sent: Fri, November 5, 2010 10:41:26 AM
Subject: Re: [RegCNET] Fw: RegCM4 postproc

Dear Ismaila,

First, are you downloaded the correct binary for your platform? Because there are different binaries for different platforms(make sure 32bit and 64bit versions). Second, I do not know why create a symbolic link but this is what I did.

To make short a long name of the binary. 
 mv  xconvR81.91   xconv
This does not matter, you can give what ever name you like. Then
 mv  xconv  /usr/bin 
Now exit from this terminal and open another one. When you type 'xconv' the xconv application window will open. You can use what ever options allowed by the package next
 to xconv. like 'xconv -i *.ctl'.

It works for me. I hope it will to you too.
Tamirat Bekele Jimma  

--- On Fri, 11/5/10, Ismaila Diallo <ismailadiallo64 at yahoo.fr> wrote:

From: Ismaila Diallo <ismailadiallo64 at yahoo.fr>
Subject: Re: [RegCNET] Fw: RegCM4 postproc
To: "tamirat bekele" <atomictamirat at yahoo.com>
Date: Friday, November 5, 2010, 2:28 AM

Dear Tamirat

i've got the xconv and i have done this command
ln -s xconvR81.91  convsh81.91.
after i try to use xconv -i test.ctl -o test.nc
and i get this error 
Segmentation fault
Thus the netcdf file isn't created.
Hope i have done
 mistake in installing the pakage binary.

thanks in advance

From: tamirat bekele <atomictamirat at yahoo.com>
To: Ismaila Diallo <ismailadiallo64 at yahoo.fr>; RegCM <RegCNET at lists.ictp.it>
Sent: Fri, November 5, 2010 8:27:50 AM
Subject: Re: [RegCNET] Fw: RegCM4 postproc

Dear Ismaila,

You can get the xconv package from this web site.
'http://badc.nerc.ac.uk/help/software/xconv/ ' It is a binary pacakge. So after unzipping it place it any 'bin' directory in which its environment is exported. like
 /usr/bin
 ...etc

I hope this helps
Tamirat Bekele Jimma

--- On Thu, 11/4/10, Ismaila Diallo <ismailadiallo64 at yahoo.fr> wrote:

From: Ismaila Diallo <ismailadiallo64 at yahoo.fr>
Subject: [RegCNET]
 Fw: RegCM4 postproc
To: "regcnet" <regcnet at lists.ictp.it>
Date: Thursday, November 4, 2010, 1:03 PM

Dear Regcnet,

i've run regcm4, transformed the output's run in daily and mouthly. these data 
are in .ctl, now i would
 like to convert the .ctl in netcdf format. Therefore 
i've known the way that i must follow to do this purpose. i've two grads version 

( GrADS Version 2.0.a7 and GrADS Version 1.9b4) and .ctl can be opened with both 

grads.
Could someone hepls me to find a way allowing me to convert the .ctl data in 
.nc.

PS! someone suggest me to use Xconv to convert my .ctl data but i haven't also 
Xconv.
hope to get your helps.

Thanks in advance.

""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
Ismaila, PhD student
LPAOSF, UCAD; Dakar-Senegal
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""

----- Original Message ----
From: bixq <bixq at ictp.it>
To: w d <raisest at yahoo.com.cn>
Cc: regcnet <regcnet at lists.ictp.it>
Sent: Wed, November 3, 2010 11:09:25
 AM
Subject: Re: [RegCNET] an error(segmentation fault) during runing regcmserial

Hi, Duan Wei:

You know, regcm4 use dynamic memory, so you have to type

ulimit -s unlimited (if you use bash)

or

limit stacksize unlimited (if you use tcsh)

before you run regcmSerial (even before you run terrain)

Good luck !
Bi Xunqiang

On Wed, 3 Nov 2010, w d wrote:

> Dear all,
>   Thank bixq,zou liwei and Taha Al Hosary for offering sst information.
>   I had successfully run the following steps and got the output data from these 
>
>step.
>     1./Bin/terrain
 regcm.in
>     2./Bin/sst regcm.in
>     3./Bin/icbc regcm.in
>   But when I run "./Bin/regcmSerial regcm.in",I got the message:
>      ******* OPENING NEW OUTPUT FILES:  2009060100
>  OPENING NEW OUT FILE: /home/regcm3/RegCM/tmp/Run_1101/output//ATM.2009060100
>  OPENING NEW SRF FILE: /home/regcm3/RegCM/tmp/Run_1101/output//SRF.2009060100
>  OPENING NEW RAD FILE: /home/regcm3/RegCM/tmp/Run_1101/output//RAD.2009060100
>  OUT-history written date =    2009060100.00000
> segmentation fault   （Chinese:段错误）
>    I had got the CTL files about ATM\SRF\RAD and 0 byte data files.
>    How to solve the error?
>  
> Good luck.
>  
> Duan Wei
> 2010.11.03.
> 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Dr. Xunqiang Bi         email:bixq at ictp.it
  Earth System Physics Group
  The Abdus Salam ICTP
  Strada Costiera, 11
  P.O. BOX 586, 34100 Trieste, ITALY
  Tel: +39-040-2240302  Fax: +39-040-2240449
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

_______________________________________________
RegCNET mailing list
RegCNET at lists.ictp.it
https://lists.ictp.it/mailman/listinfo/regcnet

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ictp.it/pipermail/regcnet/attachments/20101105/dce299f5/attachment.html>