[RegCNET] Fw: Re: Fw: Re: RegCM3

bixq bixq at ictp.it
Sat Sep 19 08:34:27 CEST 2009


Please see the previous discussions of "pdef" function in GrADS.
You know, pdef defines everything related to the grid size, while
once pdef exists, xdef and ydef just decide the visual display
resolution.

On Fri, 18 Sep 2009, sridhar nayak wrote:

> Hi,
> I am running the same RegCM3 model taking NNRP1, SST, SURFACE data.  I have
> a major doubt that after running the ./terrain.x (taking iproj: LAMCON) my
> Xsize and Ysize are automatically increasing to trice and twice that I have
> provided respectivelly while I was opening the DOMAIN.CTL file in the GrADS,
> whereas it is remaining same in other projections. May I request you to know
> why it is increasing.
> yours truely'
> Sridhara
> On Fri, Sep 18, 2009 at 8:22 AM, Haile Kebede <hailekg95 at yahoo.com> wrote:
>
>>   Dear, Emet.
>> Where is your data(say for example ERA40, SST, SURFACE)? Is that under
>> "Data" subdirectory or elsewhere? Here go back to Data subdirectory and try
>> to run datalinker.x script so that terrain.x finds appropriate input files
>> for interpolation. I mean run datalinker.x with  no error.[1st edit
>> datalinker.x,the path to your data].
>>
>> And then go to terrain subdirectory and copy appropriate makefile. Edit
>> also domain.param appropriately and run the script. I guess that the error
>> is not due to netcdf  file.
>>
>> Finally , run the RegCM for one year. Don't make your simulation bulk.
>>
>> Haile!
>> AAU
>> Ethiopia
>>
>>
>>
>>
>> --- On *Tue, 9/15/09, emet casera <emetcasera at gmail.com>* wrote:
>>
>>
>> From: emet casera <emetcasera at gmail.com>
>> Subject: Re: [RegCNET] Fw: Re: RegCM3
>> To: "Haile Kebede" <hailekg95 at yahoo.com>, "bixq" <bixq at ictp.it>
>> Cc: regcnet at lists.ictp.it
>> Date: Tuesday, September 15, 2009, 1:42 AM
>>
>> hello regcm users,
>>
>> what might be the cause of this error i have encountered?..
>>
>> [emet at unos Terrain]$ ./terrain.x
>> rm -f *.o terrain
>> /opt/intel/Compiler/11.0/083/bin/intel64/ifort -tpp7 -g -cm -w -w90 -w95
>> -convert big_endian -c
>> -L/state/partition1/home/emet/regcm05/RegCM/Commons/env/liblinux64 -lnetcdf
>> -Vaxlib terrain.f
>> /opt/intel/Compiler/11.0/083/bin/intel64/ifort -tpp7 -g -cm -w -w90 -w95
>> -convert big_endian -o terrain terrain.o
>> -L/state/partition1/home/emet/regcm05/RegCM/Commons/env/liblinux64 -lnetcdf
>> -Vaxlib
>> ld: cannot find -lnetcdf
>> make: *** [terrain] Error 1
>> ./terrain.x: line 7: ./terrain: No such file or directory
>>
>> i already installed netcdf 4.0 version..what is the right path for netcdf
>> library?
>> thank you for any hint or guidance, i will appreciate it.
>>
>> emet
>>
>>
>> On Sat, Sep 5, 2009 at 3:16 PM, Haile Kebede <hailekg95 at yahoo.com<http://mc/compose?to=hailekg95@yahoo.com>
>>> wrote:
>>
>>>   Dear, Emet. I think the data and the compiler is OK!
>>>
>>>
>>> I suppose that the error is due to following :
>>>
>>>    1.
>>>
>>>    Not following every of the steps in preprocessing and processing
>>>    steps. Here don't forget to copy the Makefile in each steps!
>>>    2.
>>>
>>>    see and display whether the DOMAIN.INFO <http://domain.info/> and
>>>    ICBCYYYYMMDD files crated using GrADS.
>>>    3.
>>>
>>>    Set the parameter(ibyte=1) instead of 4 in domain.param.
>>>
>>> Peace!
>>> Haile!
>>>
>>> --- On *Tue, 9/1/09, emet casera <emetcasera at gmail.com<http://mc/compose?to=emetcasera@gmail.com>
>>>> * wrote:
>>>
>>>
>>> From: emet casera <emetcasera at gmail.com<http://mc/compose?to=emetcasera@gmail.com>
>>>>
>>> Subject: Re: [RegCNET] RegCM3
>>> To: "bixq" <bixq at ictp.it <http://mc/compose?to=bixq@ictp.it>>
>>> Cc: "regcnet" <regcnet at lists.ictp.it<http://mc/compose?to=regcnet@lists.ictp.it>
>>>>
>>> Date: Tuesday, September 1, 2009, 11:39 PM
>>>
>>>
>>> hello bi,
>>> actually, I have done all the procedures before up to posprocessing but I
>>> repeat the compilation because seemed like i had mixed the data sets.. for
>>> example, i have mixed SST and NNRP1 data sets under NNRP1 directory. So i
>>> decided to repeat it with the same configurations but i placed all the input
>>> data into their right directory..but when i compiled again, i got this
>>> error..do you i have missed some input data?..my intel fortran was
>>> successfully installed..
>>>
>>> On Wed, Sep 2, 2009 at 2:02 PM, bixq <bixq at ictp.it<http://mc/compose?to=bixq@ictp.it>
>>>> wrote:
>>>
>>>>
>>>> Hi, Emet:
>>>>
>>>> How about you try the commands in regcm.x step by step ?
>>>>
>>>> like,
>>>>
>>>> ln -sf ../Input/DOMAIN.INFO <http://domain.info/> fort.10
>>>> ....
>>>>
>>>> and
>>>>
>>>> ./regcm < regcm.in
>>>>
>>>> It seems the FORTRAN compiler is not well installed.
>>>>
>>>> Regards,
>>>> Xunqiang Bi
>>>>
>>>>
>>>> On Wed, 2 Sep 2009, emet casera wrote:
>>>>
>>>> hello to bi and to all regcm users,
>>>>>
>>>>> Does anybody here who can help me regarding problem i have encountered
>>>>> when
>>>>> I tried run regcm.x? It says,
>>>>>
>>>>> forrtl: severe (24): end-of-file during read, unit -4, file stdin, line
>>>>> 63,
>>>>> position 0
>>>>> Image              PC                Routine            Line
>>>>>  Source
>>>>> regcm              00000000005BA741  Unknown               Unknown
>>>>>  Unknown
>>>>> regcm              00000000005B9715  Unknown               Unknown
>>>>>  Unknown
>>>>> regcm              000000000055881A  Unknown               Unknown
>>>>>  Unknown
>>>>> regcm              00000000005056C2  Unknown               Unknown
>>>>>  Unknown
>>>>> regcm              0000000000504EF1  Unknown               Unknown
>>>>>  Unknown
>>>>> regcm              000000000052915E  Unknown               Unknown
>>>>>  Unknown
>>>>> regcm              00000000004990C6  Unknown               Unknown
>>>>>  Unknown
>>>>> regcm              00000000004C9E0A  Unknown               Unknown
>>>>>  Unknown
>>>>> regcm              00000000004032AC  Unknown               Unknown
>>>>>  Unknown
>>>>> libc.so.6          00000033FAE1D8B4  Unknown               Unknown
>>>>>  Unknown
>>>>> regcm              00000000004031B9  Unknown               Unknown
>>>>>  Unknown
>>>>> what might be the cause of this error? I will appreciate your help.
>>>>> thank you..
>>>>>
>>>>>
>>>>> emet
>>>>>
>>>>>
>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>  Dr. Xunqiang Bi         email:bixq at ictp.it<http://mc/compose?to=email%3Abixq@ictp.it>
>>>>  Earth System Physics Group
>>>>  The Abdus Salam ICTP
>>>>  Strada Costiera, 11
>>>>  P.O. BOX 586, 34100 Trieste, ITALY
>>>>  Tel: +39-040-2240302  Fax: +39-040-2240449
>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>
>>>
>>>
>>> -----Inline Attachment Follows-----
>>>
>>> _______________________________________________
>>> RegCNET mailing list
>>> RegCNET at lists.ictp.it <http://mc/compose?to=RegCNET@lists.ictp.it>
>>> https://lists.ictp.it/mailman/listinfo/regcnet
>>>
>>>
>>>
>>> _______________________________________________
>>> RegCNET mailing list
>>> RegCNET at lists.ictp.it <http://mc/compose?to=RegCNET@lists.ictp.it>
>>> https://lists.ictp.it/mailman/listinfo/regcnet
>>>
>>
>>
>>
>> _______________________________________________
>> RegCNET mailing list
>> RegCNET at lists.ictp.it
>> https://lists.ictp.it/mailman/listinfo/regcnet
>>
>
>
>
> -- 
> Sridhara Nayak, PhD Student;
> Centre for Oceans, Rivers, Atmosphere and Land Sciences;
> Indian Institute of Technology; India.
>

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   Dr. Xunqiang Bi         email:bixq at ictp.it
   Earth System Physics Group
   The Abdus Salam ICTP
   Strada Costiera, 11
   P.O. BOX 586, 34100 Trieste, ITALY
   Tel: +39-040-2240302  Fax: +39-040-2240449
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



More information about the RegCNET mailing list