[RegCNET] Fw: Re: Fw: Re: RegCM3

sridhar nayak sridharanayakiitkgp at gmail.com
Fri Sep 18 20:58:35 CEST 2009


Hi,
 I am running the same RegCM3 model taking NNRP1, SST, SURFACE data.  I have
a major doubt that after running the ./terrain.x (taking iproj: LAMCON) my
Xsize and Ysize are automatically increasing to trice and twice that I have
provided respectivelly while I was opening the DOMAIN.CTL file in the GrADS,
whereas it is remaining same in other projections. May I request you to know
why it is increasing.
yours truely'
Sridhara
On Fri, Sep 18, 2009 at 8:22 AM, Haile Kebede <hailekg95 at yahoo.com> wrote:

>   Dear, Emet.
> Where is your data(say for example ERA40, SST, SURFACE)? Is that under
> "Data" subdirectory or elsewhere? Here go back to Data subdirectory and try
> to run datalinker.x script so that terrain.x finds appropriate input files
> for interpolation. I mean run datalinker.x with  no error.[1st edit
> datalinker.x,the path to your data].
>
> And then go to terrain subdirectory and copy appropriate makefile. Edit
> also domain.param appropriately and run the script. I guess that the error
> is not due to netcdf  file.
>
> Finally , run the RegCM for one year. Don't make your simulation bulk.
>
> Haile!
> AAU
> Ethiopia
>
>
>
>
> --- On *Tue, 9/15/09, emet casera <emetcasera at gmail.com>* wrote:
>
>
> From: emet casera <emetcasera at gmail.com>
> Subject: Re: [RegCNET] Fw: Re: RegCM3
> To: "Haile Kebede" <hailekg95 at yahoo.com>, "bixq" <bixq at ictp.it>
> Cc: regcnet at lists.ictp.it
> Date: Tuesday, September 15, 2009, 1:42 AM
>
> hello regcm users,
>
> what might be the cause of this error i have encountered?..
>
> [emet at unos Terrain]$ ./terrain.x
> rm -f *.o terrain
> /opt/intel/Compiler/11.0/083/bin/intel64/ifort -tpp7 -g -cm -w -w90 -w95
> -convert big_endian -c
> -L/state/partition1/home/emet/regcm05/RegCM/Commons/env/liblinux64 -lnetcdf
> -Vaxlib terrain.f
> /opt/intel/Compiler/11.0/083/bin/intel64/ifort -tpp7 -g -cm -w -w90 -w95
> -convert big_endian -o terrain terrain.o
> -L/state/partition1/home/emet/regcm05/RegCM/Commons/env/liblinux64 -lnetcdf
> -Vaxlib
> ld: cannot find -lnetcdf
> make: *** [terrain] Error 1
> ./terrain.x: line 7: ./terrain: No such file or directory
>
> i already installed netcdf 4.0 version..what is the right path for netcdf
> library?
> thank you for any hint or guidance, i will appreciate it.
>
> emet
>
>
> On Sat, Sep 5, 2009 at 3:16 PM, Haile Kebede <hailekg95 at yahoo.com<http://mc/compose?to=hailekg95@yahoo.com>
> > wrote:
>
>>   Dear, Emet. I think the data and the compiler is OK!
>>
>>
>> I suppose that the error is due to following :
>>
>>    1.
>>
>>    Not following every of the steps in preprocessing and processing
>>    steps. Here don't forget to copy the Makefile in each steps!
>>    2.
>>
>>    see and display whether the DOMAIN.INFO <http://domain.info/> and
>>    ICBCYYYYMMDD files crated using GrADS.
>>    3.
>>
>>    Set the parameter(ibyte=1) instead of 4 in domain.param.
>>
>> Peace!
>> Haile!
>>
>> --- On *Tue, 9/1/09, emet casera <emetcasera at gmail.com<http://mc/compose?to=emetcasera@gmail.com>
>> >* wrote:
>>
>>
>> From: emet casera <emetcasera at gmail.com<http://mc/compose?to=emetcasera@gmail.com>
>> >
>> Subject: Re: [RegCNET] RegCM3
>> To: "bixq" <bixq at ictp.it <http://mc/compose?to=bixq@ictp.it>>
>> Cc: "regcnet" <regcnet at lists.ictp.it<http://mc/compose?to=regcnet@lists.ictp.it>
>> >
>> Date: Tuesday, September 1, 2009, 11:39 PM
>>
>>
>> hello bi,
>> actually, I have done all the procedures before up to posprocessing but I
>> repeat the compilation because seemed like i had mixed the data sets.. for
>> example, i have mixed SST and NNRP1 data sets under NNRP1 directory. So i
>> decided to repeat it with the same configurations but i placed all the input
>> data into their right directory..but when i compiled again, i got this
>> error..do you i have missed some input data?..my intel fortran was
>> successfully installed..
>>
>> On Wed, Sep 2, 2009 at 2:02 PM, bixq <bixq at ictp.it<http://mc/compose?to=bixq@ictp.it>
>> > wrote:
>>
>>>
>>> Hi, Emet:
>>>
>>> How about you try the commands in regcm.x step by step ?
>>>
>>> like,
>>>
>>> ln -sf ../Input/DOMAIN.INFO <http://domain.info/> fort.10
>>> ....
>>>
>>> and
>>>
>>> ./regcm < regcm.in
>>>
>>> It seems the FORTRAN compiler is not well installed.
>>>
>>> Regards,
>>> Xunqiang Bi
>>>
>>>
>>> On Wed, 2 Sep 2009, emet casera wrote:
>>>
>>> hello to bi and to all regcm users,
>>>>
>>>> Does anybody here who can help me regarding problem i have encountered
>>>> when
>>>> I tried run regcm.x? It says,
>>>>
>>>> forrtl: severe (24): end-of-file during read, unit -4, file stdin, line
>>>> 63,
>>>> position 0
>>>> Image              PC                Routine            Line
>>>>  Source
>>>> regcm              00000000005BA741  Unknown               Unknown
>>>>  Unknown
>>>> regcm              00000000005B9715  Unknown               Unknown
>>>>  Unknown
>>>> regcm              000000000055881A  Unknown               Unknown
>>>>  Unknown
>>>> regcm              00000000005056C2  Unknown               Unknown
>>>>  Unknown
>>>> regcm              0000000000504EF1  Unknown               Unknown
>>>>  Unknown
>>>> regcm              000000000052915E  Unknown               Unknown
>>>>  Unknown
>>>> regcm              00000000004990C6  Unknown               Unknown
>>>>  Unknown
>>>> regcm              00000000004C9E0A  Unknown               Unknown
>>>>  Unknown
>>>> regcm              00000000004032AC  Unknown               Unknown
>>>>  Unknown
>>>> libc.so.6          00000033FAE1D8B4  Unknown               Unknown
>>>>  Unknown
>>>> regcm              00000000004031B9  Unknown               Unknown
>>>>  Unknown
>>>> what might be the cause of this error? I will appreciate your help.
>>>> thank you..
>>>>
>>>>
>>>> emet
>>>>
>>>>
>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>  Dr. Xunqiang Bi         email:bixq at ictp.it<http://mc/compose?to=email%3Abixq@ictp.it>
>>>  Earth System Physics Group
>>>  The Abdus Salam ICTP
>>>  Strada Costiera, 11
>>>  P.O. BOX 586, 34100 Trieste, ITALY
>>>  Tel: +39-040-2240302  Fax: +39-040-2240449
>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>
>>
>>
>> -----Inline Attachment Follows-----
>>
>> _______________________________________________
>> RegCNET mailing list
>> RegCNET at lists.ictp.it <http://mc/compose?to=RegCNET@lists.ictp.it>
>> https://lists.ictp.it/mailman/listinfo/regcnet
>>
>>
>>
>> _______________________________________________
>> RegCNET mailing list
>> RegCNET at lists.ictp.it <http://mc/compose?to=RegCNET@lists.ictp.it>
>> https://lists.ictp.it/mailman/listinfo/regcnet
>>
>
>
>
> _______________________________________________
> RegCNET mailing list
> RegCNET at lists.ictp.it
> https://lists.ictp.it/mailman/listinfo/regcnet
>



-- 
Sridhara Nayak, PhD Student;
Centre for Oceans, Rivers, Atmosphere and Land Sciences;
Indian Institute of Technology; India.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ictp.it/pipermail/regcnet/attachments/20090918/d7cf6f2d/attachment.html>


More information about the RegCNET mailing list