One partner had the original tar.gz for the version 4.3.5.6. Then I decided to
look at the mod_bats_leaftemp file. For starters, in version 4.3.5.6 it was
mod_bats_leaftemp.F90 and no f90 as in 4.3.5.8 tar.gz. There were differences,
but I assumed that the differences were small and, considering that the
difference between 4.3.5.6 and 4.3.5.8 would have been of solving some minor
bugs, I decided to make an experiment: compile the 4.3.5.8 with the
mod_bats_leaftemp from 4.3.5.6.

The result, was that batslib were successfully compiled, however the compile
was again stopped by make, when it complained about there was no
mod_precip.F90.

I found that there was a mod_precip.f90 instead. I tried the same as in former
follow-ups and changed the name of mod_precip.f90 to mod_precip.F90. I
configured and compiled again (always cleaning with make clean) and finally the
process was successfully completed without errors.

Thus I conclude that the packaging of the version 4.3.5.8 is not good. I will
run it and see if it gives some reasonable output.

I need to thank Peter Nunekpeku. He made an effort to solve my problem. But the
solution implied to get another more recent version of RegCM, which was not the
intent.

I would not mark this topic as closed until there is some review of
the packaged RegCM-4.3.5.8 to solve these problems: two names of source code
files are not correct and one source code file has something missing (probably
a reference to an array or a function) at least.
I know that this version is almost legacy; but trying a new version, like the
most recent, will lead me to a process of tune it again for my region of study.

------------------------------------
Diego Jiménez de la Cuesta Otero
Doktorand IMPRS-ESM
Max-Planck-Institut für Meteorologie
Atmosphäre im Erdsystem/Klimadynamik
Bundesstraße 53, Raum B429
D-20146 Hamburg

Tel.: +49 (0) 40 41173 386
Mob.: +49 (0)170 8139 769
------------------------------------

Sic Transit Gloria Mundi.

2017-03-13 11:42 GMT+01:00 Fís. Diego Jiménez de la Cuesta <diego.jimenez@mpimet.mpg.de>:
I have tried modifying the Makefile of batslib changing to mod_bats_leaftemp.f90
the dependencies to construct mod_bats_leaftemp.o. However, the same problem, as
in the former follow-up, arises. This appears to be, as I have said before, a
problem of that the model has been packaged with some parts missing or with
defective files.

It does not apply for me to migrate to the most recent version, since I want to
compare some results of version 4.3.5.6 with a version that is equivalent. Then
this error is blocking my research. Please, help me.

------------------------------------
Diego Jiménez de la Cuesta Otero
Doktorand IMPRS-ESM
Max-Planck-Institut für Meteorologie
Atmosphäre im Erdsystem/Klimadynamik
Bundesstraße 53, Raum B429
D-20146 Hamburg

Tel.: +49 (0) 40 41173 386
Mob.: +49 (0)170 8139 769
------------------------------------

Sic Transit Gloria Mundi.

2017-03-13 11:41 GMT+01:00 Fís. Diego Jiménez de la Cuesta <diego.jimenez@mpimet.mpg.de>:
I have found that Makefile asks for the file mod_bats_leaftemp.F90, but only the
file mod_bats_leaftemp.f90 exists. Thus, I changed the name of it. I compiled
with the tweak (that is needed because the makefile requires that
netcdf-fortran libraries are inside netcdf contrary to the convention given by
UNIDATA that splitted netcdf from netcdf-fortran to be independently
distributed) and it tries to compile mod_bats_leaftemp.F90. However, now it
faces a problem since it seems that certain functions have not been declared.
And also there are references to a mod_constants file that appears to be
missing.

gfortran -I/home/mpim/m300556/RegCMtests/RegCMlibs_build/RegCM-4.3.5.8/external
-I/home/mpim/m300556/RegCMtests/RegCMlibs/netcdf/netcdf-4.4.1.1/include
-I/home/mpim/m300556/RegCMtests/RegCMlibs/netcdf/netcdf-4.4.1.1/include 
-I/home/mpim/m300556/RegCMtests/RegCMlibs_build/RegCM-4.3.5.8/Share  -O3
-mtune=native -fconvert=big-endian -fno-range-check 
-I/home/mpim/m300556/RegCMtests/RegCMlibs_build/RegCM-4.3.5.8/Main/mpplib -c
mod_bats_leaftemp.F90
mod_bats_leaftemp.F90:410.53:

              rmini(n,j,i) = rsmin(lveg(n,j,i))/rmax0
                                                     1
Error: Unexpected STATEMENT FUNCTION statement at (1)
mod_bats_leaftemp.F90:422.40:

              radf(n,j,i) = rilmax/radfi
                                        1
Error: Unexpected STATEMENT FUNCTION statement at (1)
mod_bats_leaftemp.F90:419.55:

                radfi = radfi + (rad(il)+radd(il)+rmini(n,j,i)) / &
                                                       1
Error: Function 'rmini' at (1) has no IMPLICIT type
mod_bats_leaftemp.F90:437.28:

              seas = d_one/(rmini(n,j,i)+fseas(tlef(n,j,i),lveg(n,j,i)))
                            1
Error: Function 'rmini' at (1) has no IMPLICIT type
mod_bats_leaftemp.F90:438.52:

              lftrs(n,j,i) = rsmin(lveg(n,j,i))*radf(n,j,i)*seas*vpdf
                                                    1
Error: Function 'radf' at (1) has no IMPLICIT type
make[3]: *** [mod_bats_leaftemp.o] Error 1
Makefile:641: recipe for target 'mod_bats_leaftemp.o' failed

As a note, before changing the name to mod_bats_leaftemp.F90. I have compiled
it in another platform and I received the same result as reported in the
initial support issue. I would conclude that the actual packaged version of
RegCM-4.3.5.8 is defective.

------------------------------------
Diego Jiménez de la Cuesta Otero
Doktorand IMPRS-ESM
Max-Planck-Institut für Meteorologie
Atmosphäre im Erdsystem/Klimadynamik
Bundesstraße 53, Raum B429
D-20146 Hamburg

Tel.: +49 (0) 40 41173 386
Mob.: +49 (0)170 8139 769
------------------------------------

Sic Transit Gloria Mundi.

2017-03-10 22:33 GMT+01:00 Fís. Diego Jiménez de la Cuesta <diego.jimenez@mpimet.mpg.de>:
First, when configuring RegCM, once the prerequisites are built, tested and
installed, it seems that RegCM tries to find the netcdf.mod from netcdf-fortran
inside the include directory of netcdf and not in netcdf-fortran include
directory. This happens althought I am giving configure the adequate CPPFLAGS
paths to the include directories. Then I have made a soft link to the mod
file.

Second, once the configure problem is solved (in an ugly manner) as told
before, when compiling batslib in the make stage it simply stops and says:

*** No hay ninguna regla para construir el objetivo 'mod_bats_leaftemp.F90',
necesario para 'mod_bats_leaftemp.o'.  Alto.

or translated:

*** No rule to make target 'mod_bats_leaftemp.F90', needed by
'mod_bats_leaftemp.o'. Stop.

Here, I have no clue what is going on.

---------------------------------Build
details----------------------------------

First I made a build with mvapich2 library, but later I tried a mpich build,
since I thought that it could be a source of error. This is not the case, since
both end at the same error in batslib and also when mpif90 is used for some of
the modules before batslib both --mvapich2 and mpich-- succeed in the build of
them.

I am building zlib, mpich, hdf5, netcdf and netcdf-fortran from source with gcc
and gfortran, using the following commands

zlibnam=zlib-1.2.11
zlibbdir=${libsb}/${zlibnam}
zlibidir=${libs}/zlib/${zlibnam}

cd ${zlibbdir}
./configure --prefix=${zlibidir} --static
make
make test
make check
make install



mpicnam=mpich-3.2
mpicbdir=${libsb}/${mpicnam}
mpicidir=${libs}/mpich/${mpicnam}

cd ${mpicbdir}
./configure --prefix=${mpicidir}
make
make test
make check
make install



hdf5nam=hdf5-1.10.0
hdf5bdir=${libsb}/${hdf5nam}-patch1
hdf5idir=${libs}/hdf5/${hdf5nam}

cd ${hdf5bdir}
./configure --prefix=${hdf5idir}
--with-zlib=${zlibidir}/include,${zlibidir}/lib --disable-shared --disable-cxx
--disable-fortran
make
make test
make check
make install



ncdfnam=netcdf-4.4.1.1
ncdfbdir=${libsb}/${ncdfnam}
ncdfidir=${libs}/netcdf/${ncdfnam}

cd ${ncdfbdir}
CPPFLAGS="-I${hdf5idir}/include -I${zlibidir}/include"
LDFLAGS="-L${hdf5idir}/lib -L${zlibidir}/lib" LIBS="-lhdf5_hl
-lhdf5 -lz" ./configure --prefix=${ncdfidir} --disable-shared
--disable-dap --enable-netcdf4
make
make test
make check
make install



nfornam=netcdf-fortran-4.4.4
nforbdir=${libsb}/${nfornam}
nforidir=${libs}/netcdf-fortran/${nfornam}

cd ${nforbdir}
export PATH=${ncdfidir}/bin:${PATH}
CPPFLAGS="-I${ncdfidir}/include -I${hdf5idir}/include
-I${zlibidir}/include" LDFLAGS="-L${ncdfidir}/lib -L${hdf5idir}/lib
-L${zlibidir}/lib" LIBS="-lnetcdf -lhdf5_hl -lhdf5 -lz"
./configure --prefix=${nforidir} --disable-shared
make
make test
make check
make install

ln -s ${nforidir}/include/* ${ncdfidir}/include/



regcmnam=RegCM-4.3.5.8
regcmbdir=${libsb}/${regcmnam}
regcmidir=${libs}/RegCM/${regcmnam}

tar -zxvf ${regcmnam}.tar.gz
cd ${regcmbdir}
export
PATH=${zlibidir}/bin:${mpicidir}/bin:${hdf5idir}/bin:${nforidir}/bin:$PATH
./configure CPPFLAGS="-I${nforidir}/include -I${ncdfidir}/include
-I${hdf5idir}/include -I${zlibidir}/include -I${mpicidir}/include"
LDFLAGS="-L${nforidir}/lib -L${ncdfidir}/lib -L${hdf5idir}/lib
-L${zlibidir}/lib -L${mpicidir}/lib" LIBS="-lnetcdff -lnetcdf
-lhdf5_hl -lhdf5 -lz" --prefix=${regcmidir}
make
#make test
#make check
#make install


------------------------------------
Diego Jiménez de la Cuesta Otero
Doktorand IMPRS-ESM
Max-Planck-Institut für Meteorologie
Atmosphäre im Erdsystem/Klimadynamik
Bundesstraße 53, Raum B429
D-20146 Hamburg

Tel.: +49 (0) 40 41173 386
Mob.: +49 (0)170 8139 769
------------------------------------

Sic Transit Gloria Mundi.