Hi all,
Is there anyone doing satellite data assimmilation in RegCM? I am trying to give a thought for MODIS data assimmilation. Can anyone help?
Dimri
From: regcnet-request@lists.ictp.it
Reply-To: regcnet@lists.ictp.it
To: regcnet@lists.ictp.it
Subject: Regional Climate Network Digest
Date: Mon, 13 Nov 2006 16:30:50 +0100 (CET)
>
>
>Content:
>
> 1. running RegCM3/aerosol (Prodromos Zanis)
> 2. running RegCM3/aerosol (Prodromos Zanis)
> 3. Re: running RegCM3/aerosol (XUNQIANG BI)
> 4. Postdoc position available in RegModelling (konarea@yahoo.com)
>
>
>----------------------------------------------------------------------
>
>From: "Prodromos Zanis" <pzanis@geol.uoa.gr>
>Subject: [RegCNET] running RegCM3/aerosol
>
>Hi Bi
>
>I tryed to run RegCM3/aerosol (vesrion June 16, 2006) and I did the
>following:
>
>
>1) I set AERTYP='AER10D0' in domain param file
>('AER10D0', Anthropogenic, SO2 + BC + OC, no dust)
>
>2) I used the /Commons/regcm.in_6aerosol file to modify accordingly my
>regcm.in file
>
>3) I set the tracer number in parame file ntr = 6 and nbin=0
>
>Then I tryed to run regcm.x but I got the following error message
>
>RESTARTPARAM READ IN
> TIMEPARAM READ IN
> OUTPARAM READ IN
> PHYSICSPARAM READ IN
> SUBEXPARAM READ IN
> GRELLPARAM READ IN
>PGFIO-F-233/namelist read/unit=5/too many constants to initialize group item.
> File name = stdin formatted, sequential access record = 62
> In source file param.f, at line number 378
>
>Do you have any hint?
>
>best regards
>Prodromos
>
>
> > Hi, Prodromos:
> >
> > Under RegCM/Commons, there are some sample files headed with regcm.in,
> > you can follow these examples
> >
> > Regards,
> > Bi
> >
>
>
>--
>****************************************************
>Dr. Prodromos Zanis
>Centre for Atmospheric Physics and Climatology
>Academy of Athens
>3rd September 131, Athens 11251, Greece
>Tel. +30 210 8832048
>Fax: +30 210 8832048
>e-mail: pzanis@geol.uoa.gr
>Web address: http://users.auth.gr/~zanis/
>*****************************************************
>
>
>
>
>------------------------------
>
>From: "Prodromos Zanis" <pzanis@geol.uoa.gr>
>Subject: [RegCNET] running RegCM3/aerosol
>
>
>Dear colleagues
>
>I tryed to run RegCM3/aerosol (vesrion June 16, 2006) and I did the
>following:
>
>
>1) I set AERTYP='AER10D0' in domain param file
>('AER10D0', Anthropogenic, SO2 + BC + OC, no dust)
>
>2) I used the /Commons/regcm.in_6aerosol file to modify accordingly my
>regcm.in file
>
>3) I set the tracer number in parame file ntr = 6 and nbin=0
>
>Then I tryed to run regcm.x but I got the following error message
>
>RESTARTPARAM READ IN
> TIMEPARAM READ IN
> OUTPARAM READ IN
> PHYSICSPARAM READ IN
> SUBEXPARAM READ IN
> GRELLPARAM READ IN
>PGFIO-F-233/namelist read/unit=5/too many constants to initialize group item.
> File name = stdin formatted, sequential access record = 62
> In source file param.f, at line number 378
>
>Do you have any hint?
>
>best regards
>Prodromos
>
>
> > Hi, Prodromos:
> >
> > Under RegCM/Commons, there are some sample files headed with regcm.in,
> > you can follow these examples
> >
> > Regards,
> > Bi
> >
>
>
>--
>****************************************************
>Dr. Prodromos Zanis
>Centre for Atmospheric Physics and Climatology
>Academy of Athens
>3rd September 131, Athens 11251, Greece
>Tel. +30 210 8832048
>Fax: +30 210 8832048
>e-mail: pzanis@geol.uoa.gr
>Web address: http://users.auth.gr/~zanis/
>*****************************************************
>
>
>_______________________________________________
>RegCNET mailing list
>RegCNET@lists.ictp.it
>https://lists.ictp.it/mailman/listinfo/regcnet
>
>
>--
>****************************************************
>Dr. Prodromos Zanis
>Centre for Atmospheric Physics and Climatology
>Academy of Athens
>3rd September 131, Athens 11251, Greece
>Tel. +30 210 8832048
>Fax: +30 210 8832048
>e-mail: pzanis@geol.uoa.gr
>Web address: http://users.auth.gr/~zanis/
>*****************************************************
>
>
>
>
>------------------------------
>
>From: XUNQIANG BI <bixq@ictp.it>
>Subject: Re: [RegCNET] running RegCM3/aerosol
>
>On Mon, 13 Nov 2006, Prodromos Zanis wrote:
>
> > Hi Bi
> >
> > I tryed to run RegCM3/aerosol (vesrion June 16, 2006) and I did the
> > following:
> >
> >
> > 1) I set AERTYP='AER10D0' in domain param file
> > ('AER10D0', Anthropogenic, SO2 + BC + OC, no dust)
> >
> > 2) I used the /Commons/regcm.in_6aerosol file to modify accordingly my
> > regcm.in file
> >
> > 3) I set the tracer number in parame file ntr = 6 and nbin=0
>
>nbin should be 4, even though you are not run experiment with dust.
>
>
>------------------------------
>
>From: konarea@yahoo.com
>Subject: [RegCNET] Postdoc position available in RegModelling
>
>Skipped content of type multipart/alternative-------------- next part --------------
>A non-text attachment was scrubbed...
>Name: =?utf-8?q?postdoc=5F2007.doc?=
>Type: application/msword
>Size: 35328 bytes
>Desc: not available
>Url : https://lists.ictp.it/mailman/private/regcnet/attachments/20061113/c1108789/utf-8qpostdoc5F2007.dot
>
>------------------------------
>
>_______________________________________________
>RegCNET mailing list
>RegCNET@lists.ictp.it
>https://lists.ictp.it/mailman/listinfo/regcnet
>
>
>End of Regional Climate Network Digest
>**************************************