[RegCNET] Model Crashes even at lowest dt
Syed Ahsan Ali
ahsanshah01 at gmail.com
Thu Dec 26 08:47:04 CET 2013
Dear Mohamed
Thank you for your reply. The resolution is 25km. I am running simulation
again with reduced value of dtsrf. Let see what happens.
Thank you!
Best Regards
On Thu, Dec 26, 2013 at 12:20 PM, Mohamad Ibrahim OMAR <
egy_mohamad at yahoo.com> wrote:
> Dear Syed,
> First we need to know what is your resolution because this error came from
> the CFL creteria.
> anyway if you use high resolution like 20 or 25 Km you should decrease the
> dt and also dtsrf. as the following;
>
> &timeparam
> dt = 30., ! time step in seconds
> dtrad = 30., ! time interval solar radiation calculated (minutes)
> dtabem = 18., ! time interval absorption-emission calculated (hours)
> dtsrf = 120., ! time interval at which land model is called (seconds)
>
> note that dtsrf = 3 dt
> hope this helpfull.
> Regards
>
> Mohamed Ibrahim El-Sayed OMAR
> Egyptian Meteorological Authority
> Scientific Research Department
> Climate Studies Centre
> Kobry El-Quobba, P.O.Box. 11784
> Cairo, EGYPT
> Mobil phone : 002 01060802805
> Home Phone : 002 0482370261
>
>
> On Thursday, December 26, 2013 8:21 AM, Syed Ahsan Ali <
> ahsanshah01 at gmail.com> wrote:
> I am running a simulation with RegCM-4.3.5.6 version and using CMIP5 GCM
> HadGEM2-ES historical data. The model run stops at a point after running 24
> years and I get the following error. I have tried reducing the dt to lowest
> values (starting from 40 upto 5) but still the problem is same.
> Please advise!
> Ahsan
>
> *Calculate solar declination angle at 1994041600*
> * JDay 105.00 solar declination angle = 10.35514687 degrees*
> * solar TSI irradiance = 1367.0000 W/m^2*
> * SEARCH BC data for 1994041606*
> * READY BC from 1994041600 to 1994041606*
> * mod_tendency.F90 : 1434: 1*
> * MAXVAL ATEN U : 0.23073690760361867 *
> * II : 111 , JJ : 26 , KK : 3*
> * MAXVAL ATEN QV : 4.6023637038836721E+023*
> * MAXVAL ATEN U : 0.21479913170870082 *
> * II : 170 , JJ : 171 , KK : 13*
> * MAXVAL ATEN QV : 1.0977250150088500E+058*
> * MAXVAL ATEN T : 1.5864251565803420E+056*
> * MAXVAL ATEN U : 4.1836639784397066E+110*
> * MAXVAL ATEN V : 7.3548874512758020E+111*
> * MAXVAL ATEN QV : 4.4003993185280386E+052*
> * MAXVAL ATEN QC : 7.7744572396704626E+052*
> * MAXVAL ATEN U : 0.71302511089845821 *
> * II : 169 , JJ : 163 , KK : 23*
> * MAXVAL ATEN V : 0.25478128763041386 *
> * II : 169 , JJ : 148 , KK : 12*
> * MAXVAL ATEN T : 0.85502878291439455 *
> * MAXVAL ATEN T : 0.70550992717408301 *
> * II : 159 , JJ : 201 , KK : 23*
> * MAXVAL ATEN V : 0.27443318054567201 *
> * II : 105 , JJ : 199 , KK : 7*
> * MAXVAL ATEN T : 0.74070002849556327 *
> * II : 139 , JJ : 203 , KK : 23*
> * MAXVAL ATEN U : 0.66880242640804233 *
> * II : 137 , JJ : 199 , KK : 23*
> * MAXVAL ATEN V : 0.23854246733191675 *
> * II : 127 , JJ : 197 , KK : 9*
> * MAXVAL ATEN U : 0.71785515648095088 *
> * II : 164 , JJ : 206 , KK : 23*
> * MAXVAL ATEN V : 0.26687884044440968 *
> * II : 167 , JJ : 206 , KK : 8*
> * II : 116 , JJ : 200 , KK : 23*
> * MAXVAL ATEN U : 0.28197099267345371 *
> * II : 119 , JJ : 202 , KK : 8*
> * MAXVAL ATEN V : 0.31751600673955133 *
> * II : 113 , JJ : 202 , KK : 8*
>
> *--------------------------------------------------------------------------*
> *MPI_ABORT was invoked on rank 63 in communicator MPI_COMM_WORLD*
> *with errorcode 1.*
> *NOTE: invoking MPI_ABORT causes Open MPI to kill all MPI processes.*
> *You may or may not see output from other processes, depending on*
> *exactly when Open MPI kills them.*
>
> *--------------------------------------------------------------------------*
> * ATM variables written at 1994-04-16 00:00:00 UTC *
> * SRF variables written at 1994-04-16 00:00:00 UTC *
> * STS variables written at 1994-04-16 00:00:00 UTC *
> * RAD variables written at 1994-04-16 00:00:00 UTC *
> * WHUUUUBBBASAAAGASDDWD!!!!!!!!!!!!!!!!*
> * No more atmosphere here....*
> * CFL violation detected, so model STOP*
> * #####################################*
> * # DECREASE DT !!!! #*
> * #####################################*
>
>
>
>
>
>
> _______________________________________________
> RegCNET mailing list
> RegCNET at lists.ictp.it
> https://lists.ictp.it/mailman/listinfo.cgi/regcnet
>
>
--
Syed Ahsan Ali Bokhari
Electronic Engineer (EE)
Research & Development Division
Pakistan Meteorological Department H-8/4, Islamabad.
Phone # off +92518358714
Cell # +923155145014
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ictp.it/pipermail/regcnet/attachments/20131226/0f953aa4/attachment.htm>
More information about the RegCNET
mailing list