[RegCNET] Error in installing regcm4 (terrain)

[M.Sudhanshu Shekhar]

Dear Bi and all,
 
I have started installing regcm4 in linux machine with PGI compiler. Configuring goes well. While making terrain module by giving command 'make terrain' it gives following error.
Following is the error. Kindly suggest.
 
[sravan at localhost RegCM-4.0]$ ./configure
#######################################
# Welcome to the RegCM configuration! #
#######################################
This script will help you to setup the RegCM distribution
with some simple questions. Default options [between square brackets] 
will be assumed if you don't select valid options.
**** Please enter the path to your RegCM distribution: 
[ /home/sravan/nwp_model/RegCM-4.0 ]
regcm_root = 
Assuming default path as RegCM root...
**** Please enter the path where the RegCM binaries will be stored: 
[ /home/sravan/nwp_model/RegCM-4.0/Bin ]
bin_dir = 
Assuming default path for RegCM binaries...
Unable to find a working NetCDF. Please input a valid path...
For NetCDF library = /home/sravan/nwp_model/RegCM/Commons/env/liblinux64/netcdf-3.5.1/lib
For NetCDF include files = /home/sravan/nwp_model/RegCM/Commons/env/liblinux64/netcdf-3.5.1/include
NetCDF library found...
!!!! The following options are all documented in detail 
on the eForge wiki page and in the RegCM Users' Guide,
so please check there for more information.
**** Do you want a debug - 0 or a production - 1 binary? 
[1]
dbg = 
**** Do you want a serial - 0 or MPI-parallel - 1 binary? 
[1]
mpi = 0
**** Do you want to enable the DCSST - 1 or not - 0? 
[0]
DCSST = 1
**** Do you want to enable the SeaIce - 1 or not - 0? 
[0]
SeaIce = 0
**** Do you want to enable CLM - 1 or not - 0? 
[0]
CLM = 0
**** The following compiler/architecture combinations 
are tested and known to work, please choose one:
1. GNU Fortran v. 4.4 (Linux x86-64)
2. Intel Fortran v. 10 or 11 (Linux x86-64)
3. PGI Fortran v. 9 (Linux x86-64)
4. IBM Xlf Compiler (generic AIX)
5. IBM Xlf Compiler (Cineca SP6)
6. Sun Ceres Fortran 95 v 8.3 r2008/01/28 (Linux x86-64)
7. GNU+g95 Fortran compiler (Linux x86-64)
8. Other
compiler = 3
###################################################################
# Configuration complete! You should now be able to compile RegCM #
###################################################################
[sravan at localhost RegCM-4.0]$ make terrain
make: svnversion: Command not found
make[1]: svnversion: Command not found
make[1]: Entering directory `/home/sravan/nwp_model/RegCM-4.0/PreProc/Terrain'
pgf90 -D'SVN_REV=""' -O3 -byteswapio \
-c -o mod_dynparam.o ../../Config/mod_dynparam.F90
pgf90 -D'SVN_REV=""' -O3 -byteswapio \
-c -o mod_constants.o ../../Config/mod_constants.F90
pgf90 -c -I/home/sravan/nwp_model/RegCM/Commons/env/liblinux64/netcdf-3.5.1/include -O3 -byteswapio -c mod_block.f90
pgf90 -c -I/home/sravan/nwp_model/RegCM/Commons/env/liblinux64/netcdf-3.5.1/include -O3 -byteswapio -c mod_maps.f90
pgf90 -c -I/home/sravan/nwp_model/RegCM/Commons/env/liblinux64/netcdf-3.5.1/include -O3 -byteswapio -c mod_interp.f90
pgf90 -c -I/home/sravan/nwp_model/RegCM/Commons/env/liblinux64/netcdf-3.5.1/include -O3 -byteswapio -c mod_rdldtr.f90
PGF90-F-0004-Corrupt or Old Module file /home/sravan/nwp_model/RegCM/Commons/env/liblinux64/netcdf-3.5.1/include/netcdf.mod (mod_rdldtr.f90: 341)
PGF90/x86-64 Linux 9.0-4: compilation aborted
make[1]: *** [mod_rdldtr.o] Error 2
make[1]: Leaving directory `/home/sravan/nwp_model/RegCM-4.0/PreProc/Terrain'
make: *** [terrain] Error 2
[sravan at localhost RegCM-4.0]$ 
 
Regards
Shekhar
India


#################################
Dr. M. S. Shekhar
Scientist 'C', DRDO
Snow & Avalanche Study Establishment
R & D Centre, Him Parisar
Sector 37A, Chandigarh
#################################
 


 

> Date: Fri, 5 Nov 2010 12:06:27 +0100
> From: bixq at ictp.it
> To: bintbal at yahoo.com
> CC: regcnet at lists.ictp.it
> Subject: Re: [RegCNET] error in serial running
> 
> 
> Hi, Saidat Opeyemi Balogun:
> 
> I think you added some mistakes when you edit regcm.in,
> 
> You can go back to setup_simulation.py step, recreate an regcm.in from
> one of the templates under Examples/ directory.
> 
> Regards,
> Xunqiang Bi
> 
> On Fri, 5 Nov 2010, Saidat Opeyemi Balogun wrote:
> 
> > pls can someone help me out
> > i put in this command ./Bin/regcmSerial regcm.in and gives this error,
> >
> >
> > cannot read the namelist file regcm.in
> > parameter initialization not completed
> >
> >
> > Balogun S.O.
> > Atmospheric Research and Information Analysis Laboratory.
> > Centre for Energy, Research and Development,
> > O.A.U. Ile - Ife
> > +2348038268829
> >
> >
> >
> >
> 
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Dr. Xunqiang Bi email:bixq at ictp.it
> Earth System Physics Group
> The Abdus Salam ICTP
> Strada Costiera, 11
> P.O. BOX 586, 34100 Trieste, ITALY
> Tel: +39-040-2240302 Fax: +39-040-2240449
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> _______________________________________________
> RegCNET mailing list
> RegCNET at lists.ictp.it
> https://lists.ictp.it/mailman/listinfo/regcnet
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ictp.it/pipermail/regcnet/attachments/20101109/9391d882/attachment.html>