[RegCNET] Nan error during model run

Abdou Abdellatif Esawy Awwad aabdou at ictp.it
Mon Jan 25 05:24:26 CET 2010


HI Dwijendra
  Please check your system as follows:
 1-your data links in
   RegCM/PreProc/DATA (be sure that your data or its linke are there)
   then recheck the compilation of ICBC as follows:
 cd  RegCM/PreProc/ICBC, Check the Makefile you are using and the location
of netcdf library and weather it fits your system (32bit or 64bit), it
may needs some modification. do the following"
  make clean
  make

if you got correct comilation, run you icbc.x and then bake to ../Input to
check the ICBC??? size




> Dear RegCm users,
>
> I was trying to run RegCm on a IBM p5 system (3 months simulation),but
> while
> running the sst and ICBC it gives following error
>
> *                         1501-510  Compilation successful for file
> ICBC.f.
>                          xlf_r -o ICBC ICBC.o
> -L/gpfs/usr/local/netcdf/lib/
> -lnetcdf
>                         NREC =  289276
>                         NSTART,NNNEND:  71593 71945
>                          IDATE1,IDATE2:  1997010100 1997033000
>                          grep: 0652-033 Cannot open �FH.
>                         Usage: mv [-I] [-i | -f] [-E{force|ignore|warn}]
> [--] src target
>                         or: mv [-I] [-i | -f] [-E{force|ignore|warn}] [--]
> src1 ... srcN directory
>                         cat: 0652-050 Cannot open �FH.*
>
> but ICBC files were created. I tried to plot with grads it shows following
> error
>
> *ga-> open ICBC1997010100.CTL
> Scanning description file:  ICBC1997010100.CTL
> Open Error: Invalid pdef record.
>   --> The invalid description file record is:
>   --> pdef   51   34 lccr   45.39   13.48   25.50   17.00   30.00   60.00
> 13.48  60000.  60000.
>
>   The data file was not opened.
>
> *
> What might be the possible cause
>
> kindly help*
> *
> regards
>
> Dwijendra
>
>
>
>
> On Sun, Jan 24, 2010 at 12:09 PM, Abdou Abdellatif Esawy Awwad <
> aabdou at ictp.it> wrote:
>
>> Hi
>>  Check your ../Input/ICBC*  files by GraDS to be sure that it fully
>> cover
>> the period mentioned in the ../PreProc/Terrain/domain.pram
>>                                (idate1 =??????, idate2=........)
>> regards
>>
>> >
>> > Dear RegCNETers,
>> > I am conducting a RegCM run (3 months simulation). It is going fine
>> but
>> > getting the NaN error during the last six hours of model run. If I try
>> a
>> > restart run with the last 'SAV' file, this too encounters 'NaN' error.
>> In
>> > general, NaN error occurs with inappropriate in the time step issue
>> (dt
>> in
>> > regcm.in) and so I have attempted with several changes in the time
>> step
>> > (dt) but there is no success.
>> > Can you please suggest what could be the probable error.
>> > My Namelist file in the simulation with 30 km resolution is as
>> follows.
>> >  radfrq  =    30.,
>> >  abemh   =    18.,
>> >  abatm   =   90.,
>> >  dt      =   30.,
>> >  I tried changes in (dt, abatm) as (30,90), (30,180), (30, 300),
>> (30,600)
>> > and also (60,180)etc.
>> >
>> > Thanks.
>> > Regards
>> > Satyaban
>> >
>> >
>> -------------------------------------------------------------------------------
>> > Dr. Satyaban Bishoyi Ratna
>> > Computational Atmospheric Sciences Team
>> > Scientific & Engineering Computing Group
>> > Centre for Development of Advanced Computing (C-DAC)
>> > Pune University Campus, Ganeshkhind
>> > Pune - 411 007, Maharashtra, India
>> > E-mail: satyabanb at cdac.in
>> > Tel (O): +91-020-2570 4226,  (Cell): +91-094223 56326
>> >
>> --------------------------------------------------------------------------------_______________________________________________
>> > RegCNET mailing list
>> > RegCNET at lists.ictp.it
>> > https://lists.ictp.it/mailman/listinfo/regcnet
>>
>>
>> All the best
>> ==================================
>> Dr. Abdellatif Esawy Awwad Abdou
>> Regular Associate of ICTP,
>> Prof. Assistant
>> Center of Excellence for Climate Change Research (CECCR)
>> King Abdulaziz University
>> P.O. Box 80208 Jeddah 21589
>> Kingdome of Saudi Arabia
>> E-mail: aeabdu at kau.edu.sa or
>>        aabdou at ictp.it
>>        drabdellatifesawy at gmail.com
>>        abdellatif_abdou at yahoo.com
>> Website (Ar): http://www.kau.edu.sa/Default.aspx?Site_ID=0055568&lng=AR
>> Website (En): http://www.kau.edu.sa/Default.aspx?Site_ID=0055568&lng=en
>> Tel       : (+966) 2 695 2369
>> Mobile    : (+966) 5 44794590
>> Fax:      : (+966) 2 6952376
>> Tel.(home): (+966) 2 6886441
>>  ==================================
>>
>> _______________________________________________
>> RegCNET mailing list
>> RegCNET at lists.ictp.it
>> https://lists.ictp.it/mailman/listinfo/regcnet
>>
> _______________________________________________
> RegCNET mailing list
> RegCNET at lists.ictp.it
> https://lists.ictp.it/mailman/listinfo/regcnet


All the best
==================================
Dr. Abdellatif Esawy Awwad Abdou
Regular Associate of ICTP,
Prof. Assistant
Center of Excellence for Climate Change Research (CECCR)
King Abdulaziz University
P.O. Box 80208 Jeddah 21589
Kingdome of Saudi Arabia
E-mail: aeabdu at kau.edu.sa or
        aabdou at ictp.it
        drabdellatifesawy at gmail.com
        abdellatif_abdou at yahoo.com
Website (Ar): http://www.kau.edu.sa/Default.aspx?Site_ID=0055568&lng=AR
Website (En): http://www.kau.edu.sa/Default.aspx?Site_ID=0055568&lng=en
Tel       : (+966) 2 695 2369
Mobile    : (+966) 5 44794590
Fax:      : (+966) 2 6952376
Tel.(home): (+966) 2 6886441
 ==================================



More information about the RegCNET mailing list