[RegCNET] RegCM can't run with IFC9
IMRAN NADEEM
qphoton at gmail.com
Thu Jul 13 20:22:07 CEST 2006
Hi Coatas Douvis,
For IFC 9 use Makefile_IFC8. Your domain files are wrong because
you are using wrong value of ibyte. Just change your ibyte to 1 in
domain.param.
I hope your problem will be solved.
Imran
--
Imran Nadeem
PhD Student
Institute of Meteorology
Department of Water, Atmosphere and Environment
Uni. of Natural Resources and Applied Life Sciences (BOKU)
Peter-Jordan Strasse 82
1190 Vienna, Austria
Mobile: +43 699 1194 3044
Tel.: +43 1 47654 5614
Fax: +43 1 47654 5610
On 7/13/06, Costas Douvis <cdouvis at geol.uoa.gr> wrote:
>
> Hi all
>
> I' ve just downloaded the RegCM and the latest free version of the Intel
> Fortran Compiler (this is 9.0. I tried to find an older version on the web
> but I couldn' t). I use Linux SUSE 10.0
>
> The problem is that there is not a Makefile_IFC9 in the
> RegCM/PreProc/Terrain so I tried to use those Makefile_IFC available (7, 8
> and 8.64) but only Makefile_IFC8 did work and still the DOMAIN files it
> created in the RegCM/Input were wrong. Most variables were constant/empty
> and some seemed right but were un
> der the wrong name.
>
> Can anyone help me?
>
>
>
>
>
>
> This is the DOMAIN.CTL:
>
> dset ^DOMAIN.INFO
> title RegCM domain information
> options big_endian
> undef -9999.
> pdef 51 34 lcc 45.39 13.48 25.50 17.00 30.00 60.00 13.48
> 60000. 60000.
> xdef 175 linear -9.61 0.2703
> ydef 78 linear 34.70 0.2703
> zdef 1 levels 1000.00
> tdef 1 linear 00z01Jan2001 1mo
> vars 13
> head 0 99 header information
> ht 0 99 surface elevation
> htsd 0 99 surface elevation std. dev
> landuse 0 99 surface landuse type
> xlat 0 99 latitude of cross points
> xlon 0 99 longitude of cross points
> dlat 0 99 latitude of dot points
> dlon 0 99 longitude of dot points
> xmap 0 99 map factors of cross point
> dmap 0 99 map factors of dot points
> coriol 0 99 coriol force
> snowam 0 99 initial snow amount
> mask 0 99 land/sea mask
> endvars
>
>
>
>
> ...and this is what was written by the ./terrain.x
>
> kostas at linux:~/regcm/RegCM/PreProc/Terrain> ./terrain.x
> rm -f *.o terrain
> ifort -tpp7 -g -cm -w -w90 -w95 -convert big_endian -c
> -L../../Commons/env/liblinux/ -lnetcdf -Vaxlib terrain.f
> ifort -tpp7 -g -cm -w -w90 -w95 -convert big_endian -o terrain terrain.o
> -L../../Commons/env/liblinux/ -lnetcdf -Vaxlib
> ntypec= 10
> iy= 34
> jx= 51
> ds= 60.00000
> clat= 45.39000
> clon= 13.48000
> rin= 1.500000
> iproj=LAMCON
> ***** Terrain resolution (min): 10.00000
> after calling SETUP
> PSX,PSI1 = 0.7785914 0.5235988
> PSX,PSI1 = 0.7785914 0.5235988
> XN,TRUELATL,TRUELATH = 0.7155668 30.00000 60.00000
> after calling MAP PROJECTION
> xminlat,xmaxlat,xminlon,xmaxlon,ntypec= 34.97 54.85 -9.34
> 37.18 10
> after calling MXMNLL
> 33759 terrain heights read from land use volume
> after calling RDLDTR
> after calling XYOBSLL
> rin,ds(m) = 0.150E+01 0.600E+05
> rin,ds(m) = 0.150E+01 0.600E+05
> after calling ANAL2
> after calling SURF
> after calling FUDGE
> after calling OUTPUT
> /bin/rm -f ../ICBC/fort.10
>
> /bin/ln -s ../../Input/DOMAIN.INFO
> ../ICBC/fort.10
>
> 9999
>
>
>
>
> _______________________________________________
> RegCNET mailing list
> RegCNET at lists.ictp.it
> https://lists.ictp.it/mailman/listinfo/regcnet
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ictp.it/pipermail/regcnet/attachments/20060713/a1afb9d8/attachment-0002.html>
More information about the RegCNET
mailing list