[RegCNET] RegCM can't run with IFC9

[IMRAN NADEEM]

Hi Coatas Douvis,

           For IFC 9 use Makefile_IFC8. Your domain files are wrong because
you are using wrong value of ibyte. Just change your ibyte to 1 in
domain.param.
I hope your problem will be solved.

Imran
-- 
Imran Nadeem
PhD Student
Institute of Meteorology
Department of Water, Atmosphere and Environment
Uni. of Natural Resources and Applied Life Sciences (BOKU)

Peter-Jordan Strasse 82
1190 Vienna, Austria

Mobile: +43 699 1194 3044
Tel.: +43 1 47654 5614
Fax: +43 1 47654 5610



On 7/13/06, Costas Douvis <cdouvis at geol.uoa.gr> wrote:
>
> Hi all
>
> I' ve just downloaded the RegCM and the latest free version of the Intel
> Fortran Compiler (this is 9.0. I tried to find an older version on the web
> but I couldn' t). I use Linux SUSE 10.0
>
> The problem is that there is not a Makefile_IFC9 in the
> RegCM/PreProc/Terrain so I tried to use those Makefile_IFC available (7, 8
> and 8.64) but only Makefile_IFC8 did work and still the DOMAIN files it
> created in the RegCM/Input were wrong. Most variables were constant/empty
> and some seemed right but were un
> der the wrong name.
>
> Can anyone help me?
>
>
>
>
>
>
> This is the DOMAIN.CTL:
>
> dset ^DOMAIN.INFO
> title RegCM domain information
> options big_endian
> undef -9999.
> pdef   51   34 lcc   45.39   13.48   25.50   17.00   30.00   60.00   13.48
> 60000.  60000.
> xdef  175 linear   -9.61  0.2703
> ydef   78 linear   34.70  0.2703
> zdef 1 levels 1000.00
> tdef 1 linear 00z01Jan2001 1mo
> vars 13
> head    0 99 header information
> ht      0 99 surface elevation
> htsd    0 99 surface elevation std. dev
> landuse 0 99 surface landuse type
> xlat    0 99 latitude  of cross points
> xlon    0 99 longitude of cross points
> dlat    0 99 latitude  of dot points
> dlon    0 99 longitude of dot points
> xmap    0 99 map factors of cross point
> dmap    0 99 map factors of dot points
> coriol  0 99 coriol force
> snowam  0 99 initial snow amount
> mask    0 99 land/sea mask
> endvars
>
>
>
>
> ...and this is what was written by the     ./terrain.x
>
> kostas at linux:~/regcm/RegCM/PreProc/Terrain> ./terrain.x
> rm -f *.o terrain
> ifort -tpp7 -g -cm -w -w90 -w95 -convert big_endian -c
> -L../../Commons/env/liblinux/ -lnetcdf -Vaxlib terrain.f
> ifort -tpp7 -g -cm -w -w90 -w95 -convert big_endian -o terrain terrain.o
> -L../../Commons/env/liblinux/ -lnetcdf -Vaxlib
> ntypec=          10
> iy=          34
> jx=          51
> ds=   60.00000
> clat=   45.39000
> clon=   13.48000
> rin=   1.500000
> iproj=LAMCON
> ***** Terrain resolution (min):    10.00000
> after calling SETUP
> PSX,PSI1 =   0.7785914      0.5235988
> PSX,PSI1 =   0.7785914      0.5235988
> XN,TRUELATL,TRUELATH =   0.7155668       30.00000       60.00000
> after calling MAP PROJECTION
> xminlat,xmaxlat,xminlon,xmaxlon,ntypec=      34.97     54.85     -9.34
> 37.18        10
> after calling MXMNLL
>      33759 terrain heights read from land use volume
> after calling RDLDTR
> after calling XYOBSLL
> rin,ds(m) =   0.150E+01   0.600E+05
> rin,ds(m) =   0.150E+01   0.600E+05
> after calling ANAL2
> after calling SURF
> after calling FUDGE
> after calling OUTPUT
> /bin/rm -f ../ICBC/fort.10
>
> /bin/ln -s ../../Input/DOMAIN.INFO
> ../ICBC/fort.10
>
> 9999
>
>
>
>
> _______________________________________________
> RegCNET mailing list
> RegCNET at lists.ictp.it
> https://lists.ictp.it/mailman/listinfo/regcnet
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://lists.ictp.it/mailman/private/regcnet/attachments/20060713/a1afb9d8/attachment.html